Spec Sheet

BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Created on:
11/16/2016
DUAL SH DBC Low
Profile SST w/ LWR
FCT
32.0" x 21.2" x 18.0"
(81.3cm x 53.8cm x 45.7cm)
Servers and airpots sold separately
Brews either 12 gallon or 1 gallon (1.9 or 3.8L) batches
Brews up to 19.3gallons (73.1L) of perfect coffee per hour
No hot surfaces in coffee holding area
Reduce accidents with safety features that decrease hot splashes
from funnel, eliminate brewing when funnel or server is not present
Patented server heat conrol automatically shuts off once target
temperature is reached (Can be set to 175º-190ºF (79.4º-87.8ºC))
Simplify installation and calibration by creating your own recipe
cards and dedicated funnels with the BrewWISE Recipe Writer
using your PC (Windows® compatible).
SplashGard® funnels deflect hot liquids away from the hand
Energy saver mode reduces tank temperature during idle periods
Operate any combination of BrewWISE equipment error-free with
wireless brewer-grinder interface through Smart Funnel with
SplashGard®
Stores individual coffee and flavor profiles using adjustable water
volume, bypass percentage, pulse brew, and pre-infusion timing
Troubleshoot all switches and electrical components from the front
panel with advanced diagnostic service tools
Agency:
Specifications Additional Features
33500.0046Product #: LowerFaucet: BUNNLINK Compatible
PlumbedWater Access: Low Profile
Wireless
Interface:
BrewWISE
Stainless
Finish:
Black PlasticFunnel:
Electrical & Capacity
Volts Amps Watts
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
Phase
# Wires
plus Ground
Hertz
120/208-240
23.9-29.1 4980-6800 No - -
60°F (15.5°C)
1 3 60
Plumbing Requirements CAD Drawings
PSI kPa
Fitting Supplied
Water Flow Required (GPM)
20-90 138-621
1/4" Male Flare Fitting
-
2D
Revit
KLC

Summary of content (4 pages)