INSTALLATION & OPERATING GUIDE

OPERATING CONTROLS

ULTRA-1

There are three of these switches that will be used for the operation of the dispenser.

1. switch (upper left corner of the control pad)

This switch is the ON/OFF toggle switch which powers up the dispenser and the LCD display. When ON

the Date and Time toggle back and forth continously except during programming.

2. (upper right corner)

This is used to turn the auger motor to AUGER ON, AUGER OFF or AUGER REFILL ON. (Reﬁll only ap-

plicable when installed)

3. (lower right corner)

This is used to turn the ice control to OFF, ICE or CHILL.

4. Hidden buttons used for Programming.

P3932

40563 041108