Service and Repair Manual

41084 102709

OPERATING CONTROLS

ULTRA-2

There are ﬁve of these switches that will be used for the operation of the dispenser.

1. switch (upper left corner of the control pad)

This switch is the ON/OFF toggle switch which powers up the dispenser and the LCD display. When ON

the Date and Time toggle back and forth continously except during programming.

2. (bottom left corner)

This is used to turn the left side auger motor to AUGER ON, AUGER OFF or AUGER REFILL ON. (Reﬁll

only applicable when installed) (See *NOTE)

3. (bottom left corner)

This is used to turn the left side ice control to OFF, ICE or CHILL.

4. (bottom right corner)

This is used to turn the right side auger motor AUGER ON, AUGER OFF or AUGER REFILL ON. (Reﬁll only

applicable when installed) (See *NOTE)

5. (bottom right corner)

This is used to turn the right side ice control to OFF, ICE or CHILL.

2 3 4 5

P3677