INSTALLATION & OPERATING GUIDE

Install Date

The following three screens will scroll after advancing past the function “Restore Defaults”. The Install Date

and Time is recorded when the dispenser is powered on for the ﬁrst 100 hours. The Install Date and Time cannot

be reset and is stored in permanent memory.

JAN. 20, 2005

3:55:25 PM

ULTRA

VERSION # __.__

PROGRAMMING THE DISPENSER (Cont.)

Set Night Time/Set Day Time

The setting of the Day/Night mode allows the dispenser to “power down” during off hours. The bottom corners

displaying “ICE” will change to “CHILL” during the night mode. During the night mode, the product will be kept

chilled to below 35°F. “ICE” reading will return after night mode elapses. With “OFF” representing 12:00 AM, the

operator can scroll to the times desired for the night time mode to begin and end.

SET DAY TIME

(-) OFF (+)

NOTE: Several other menu functions are included in this dispenser. Please refer the Programming Manual avail-

able on the Bunn website at www.bunn.com

SET NIGHT TIME

(-) OFF (+)

INSTALL DATE

NIGHT TIME MODE

CHILL CHILL

45246 072611

RELEASED FOR PRODUCTION

DIR Num: 45246.0000 12, June 2015