Use and Care Manual

ManualsBrandsBunn ManualsAppliancesG3 HD, 3 lb. Black Bulk Commercial Coffee Grinder

INSTALLATION & OPERATING GUIDE

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts

Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at

www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and

manual updates. For Technical Service, contact Bunn-O-Matic Corporation at 1-800-286-6070.

G1,G2,G3

& G2 trifecta

RELEASED FOR PRODUCTION

DIR Num: 43254.0000 19, May 2015

Summary of content (6 pages)

PAGE 1
RELEASED FOR PRODUCTION G1,G2,G3 & G2 trifecta® INSTALLATION & OPERATING GUIDE BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS 62708-3227 PHONE: (217) 529-6601 FAX: (217) 529-6644 To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and manual updates.
PAGE 2
RELEASED FOR PRODUCTION BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh® servers (mechanical and digital) 1 year parts and 1 year labor.
PAGE 3
RELEASED FOR PRODUCTION USER NOTICES Carefully read and follow all notices on the grinder and in this manual. They were written for your protection. All notices on the grinder are to be kept in good condition. Replace any unreadable or damaged labels. R LA 4 7 FIN E RSE E 9 2 1 10 SSO COA FIN C E PR O ES S PR ES H R PE 3 8 TURKIS MATIC DRIP AUTO 5 6 RIP EL EC AUTO -D LAR DRIP REGU K PER ES RE GU C ELE H TURKIS SPECIAL 11075.0000 11075.0100 G2 trifecta 11075.
PAGE 4
RELEASED FOR PRODUCTION ELECTRICAL REQUIREMENTS CAUTION - The grinder must be disconnected from the power source until specified in Initial Set-Up. Refer to Data Plate on the Brewer, and local/national electrical codes to determine circuit requirements. 100V & 120V Models 230 VOLT CE Model Note: This electrical service consists of 2 current carrying conductors (L1 and Neutral) and a separate conductor for chassis ground.
PAGE 5
RELEASED FOR PRODUCTION CLEANING WARNING - Unplug the grinder before the removal of any panel or grind chamber-housing parts. 1. Clean all exterior surfaces using a damp cloth rinsed in any mild, nonabrasive, liquid detergent. Care should be taken not to scratch the grinder with any abrasive material. 2. Empty all beans from hopper(s). Plug in the grinder, place an empty bag behind the dispense chute or trifecta brew cup. Press and release the “START” switch.
PAGE 6
RELEASED FOR PRODUCTION COFFEE GRINDING 1. 2. 3. Turn the selector knob to align the arrow with the desired grind. Raise the top lid and add the whole bean coffee. Close the top lid. Locate the back of a bag behind the dispense chute or insert the brew cup. (The grinder will not operate unless the bag/brew cup sensor is activated) 4. Allow the bag to rest on the screen beneath the chute. 5. Press the start switch. 6. Flip the cleaning lever a few times as dispensing slows. 7.