Owner's Manual

14
CENTER FREQUENCY
125.7 Khz Adj 1
SERVICE MENU (continued)
Test Frequency
The menu screen is used to see and test the frequency value for the read/write coils that may or may not
be on the equipment. The read/write capability operates between 124 to 127 Khz.
Grind Counters
This menu displays analytics in regards to total grinds, total grinds per batch or side, as well as flavor counts.
To access Test Frequency:
1. Ensure machine is powered on.
2. Access programming.
3. The first screen should read “SELECT”. Use the right hidden button to navigate to “SERVICE”.
4. At the “SERVICE” screen, press SELECT.
5. The next screen will read “TEST OUTPUTS”.
Select the right hidden button to navigate to
“TEST FREQUENCY”. Press SELECT.
6. Press the right hidden button to EXIT.
To access Grind Counters:
1. Ensure machine is powered on.
2. Access programming.
3. The first screen should read “NAME HOPPER”. Use the right hidden button to navigate to “SERVICE”.
4. At the “SERVICE” screen, press SELECT.
5. The next screen will read “TEST OUTPUTS”. Select the right hidden switch to navigate to
“GRIND COUNTERS”. Press SELECT.
6. Use the right button under the display to navigate through the information presented on the display.
NOTE: The values displayed can be reset using the left hidden switch (reset).
NOTE: When a hopper or
Smart Funnel
®
is in place
and detected, an asterisk (*)
will appear next to the “Adj”.
LEFT FREQUENCY
125.7 Khz* Adj 1
LEFT FREQUENCY
125.7 Khz Adj 1
RIGHT FREQUENCY
125.7 Khz Adj 1
Left Frequency
refers to the left
bean hopper.
Center Frequency
refers to the
Smart Funnel
®
.
Right Frequency
refers to the right
bean hopper.
Serial Asset Number
This function allows the operator to enter in an optional asset number. This can be useful for tracking the
usage or service of an individual machine within a group.
To access Serial Asset Number:
1. Ensure machine is powered on.
2. Access programming.
3. The first screen should read “NAME HOPPER”. Use the right hidden button to navigate to “SERVICE”.
4. At the “SERVICE” screen, press SELECT.
5. The next screen will read “TEST OUTPUTS”. Select the right hidden button to navigate to
“SERIAL ASSET NUMBER”. Press SELECT.
6. The next screen to appear is “ENTER ASSET #”. Use the left and right buttons under the display to
change the values. Select DONE when complete.
7. The next screen to appear is “SERIAL-ASSET #”. Use the left and right buttons under the display to
change the values. Select the DONE when complete.