Owner's Manual

19
UPDATE PROGRAMMING USING USB STICK (continued)
NOTE: See steps to access USB port on previous page.
1. Insert empty USB Flash Drive into grinder.
Screen should read “USB DETECTED”
2. Next, the screen will read “SAVE TO.”
Select “USB” which will be the only option.
3. When finished the screen will read “SAVE
COMPLETE REMOVE DRIVE.”
Remove the flash drive.
4. When in front of the next grinder, insert USB Flash Drive
into grinder.
The screen should then read “USB DETECTED”
5. Next, the screen will read “SAVE TO.”
Select “GRINDER”.
6. Next, screen will read “COPYDISK.GND TO GRINDER?”
Select “YES”.
7. When completed the screen will read “SAVE COMPLETE
REMOVE DRIVE.”
8. Remove USB Flash Drive.
Copy Settings From Machine To Machine
Procedure for copying settings from one grinder to another
grinder of the same model.
USB DETECTED
USB DETECTED
SAVE TO
USB
SAVE TO
USB GRINDER
SAVE COMPLETE
REMOVE DRIVE
COPYDISK.GND TO
NO GRINDER? YES
SAVE COMPLETE
REMOVE DRIVE
1
GRINDER 1
GRINDER 2
2
3
4
5
6
7
8