Owner's Manual

8
How to Access Programming
To enter programming mode, the home screen must be present on
the display. Touch the area below the BUNN logo for 2 seconds.
The “SELECT COFFEE” screen will appear on the display.
PROGRAMMING
How to Navigate Programming
Once programming is accessed, use the left and right hidden
switches to navigate through the list of menus.
Programming Lockout
This switch is located on the control board located behind the
membrane touch pad (user interface). The switch can be set to
prevent access to the advanced programming settings of the
grinder. Once all the settings are programmed, the operator can
set the switch to the “ON” position to prohibit anyone from viewing
and changing settings. The grinder must be powered down when
setting the switch.
GRIND
STOP
GRIND
STOP
continued >
NAME HOPPER
<< SELECT >>
RECIPES
<< SELECT >>
SETTINGS
<< SELECT >>
SERVICE
<< SELECT >>
Programming Menus
The follow outlines the navigation flow of the main programming menus.