Manualshelf

Owner's Manual

ManualsBrandsBUNN ManualsAppliancesMulti-Hopper Stainless Steel Coffee Grinder & Storage System
12345678910
9
continued >
Name Hopper
This option allows the operator to assign a recipe name to either hopper. Default hopper names are stored
under this menu and can be changed.
Recipe Menu
The following outlines the navigation flow for the RECIPE sub-menus.
PROGRAMMING (continued)
NAME HOPPER
<< SELECT >>
WHICH SIDE?
LEFT RIGHT
REGULAR
PREV DONE NEXT
To assign a hopper name:
1. Ensure machine is powered on.
2. Access programming by pressing the right hidden button until the program menu appears.
3. The first screen should read “NAME HOPPER”. Press SELECT to enter this option.
4. The next screen will ask which side to name (left or right hopper). Select LEFT or RIGHT. You can
always revisit this step to choose the other side to name at a later time.
5. The next screen will allow the operator to navigate through a list of default coffee names stored in the
grinder. Use the buttons under the display to navigate. Once a name has been found, select SAVE to
confirm the name.
6. The next screen will ask “Are you sure?”. Select YES to save the name.
NOTE: If the hopper wasn’t named when performing this procedure, ensure the hopper is properly
installed on top of the grinder as described on page 6.
REVIEW RECIPES
<< SELECT >>
REMOVE RECIPE
<< SELECT >>
Review Recipes
This option allows the operator to review recipes stored in programming.
SMALL BATCH
GRIND TIME: 3.2
MEDIUM BATCH
GRIND TIME: 5.2
LARGE BATCH
GRIND TIME: 7.2
REVIEW RECIPES
<< SELECT >>
ORIGINAL
MODIFY SHOW NEXT
To review recipes:
1. Ensure machine is powered on.
2. Access programming.
3. The first screen should read “NAME HOPPER”. Use the right hidden button to navigate to “RECIPES”.
4. At the “RECIPE” screen, press SELECT.
5. The next screen will read “REVIEW RECIPES”. Press SELECT.
6. Press NEXT to navigate to the recipe for review. If the recipe name is the first on the display, proceed to next step.
7. Select SHOW.
8. Grind Weight for each recipe and corresponding batch size will be displayed. Press the batch selector
pads to view settings that pertain to the batch size.