Programming Manual

Page 23
BREW COUNTERS
This function allows the operator to track the total num-
ber of brew cycles completed, as well as the number of
batches brewed using each of the brew buttons. There
are (up to) six resettable counters, and one life counter
that is not resettable.
Procedure to view/reset the brew counters:
1. Press and hold the right hidden button until the
display reads RECIPES. Press the right hidden
button until the display reads SERVICE, then press
SELECT. Press and release the right hidden switch
until the display reads BREW COUNTERS.
2. Pressing NO will advance to the next programming
function. Select YES to view the first brew counter
(TOTAL LIFE BREWS). This number represents the
total number of brew cycles this brewer has com-
pleted. This counter is non-resettable. Press NEXT
to advance to the next brew counter, <- <- BREW
A (left side).
3. This counter represents the number of brews for
Brew A on the left side of the brewer. To reset the
counter to zero, press and release RESET. Press
and release NEXT to advance to the next counter.
4. Repeat step 3 for the remaining two left counters,
BREW B and BREW C.
5. Repeat step 4 for the three right side brew counters.
(Twin only)
6. When finished, press NEXT to advance to the next
programming function, ENTER ASSET #. To exit
programming and return to the MAIN SCREEN,
press ENABLE BREW ON/OFF switch.
PRESSING NO WILL
ADVANCE TO
ENTER ASSET #
ICB Twin
shown.
others
similar
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS (cont.)
BREW COUNTERS?
TOTAL LIFE BREWS
<< XXX BREW A
<< XXX BREW B
<< XXX BREW C
BREW A XXX >>
BREW B XXX >>
BREW C XXX >>
ENTER ASSET #?
NO YES
XXXX NEXT
RESET NEXT
RESET NEXT
RESET NEXT
RESET NEXT
RESET NEXT
RESET NEXT
NO YES
53669 041817