USE AND CARE OF YOUR BUNN POUR-OMATIC Model A-10 Coffee Brewer Welcome to the world of fine coffee. The Bunn Pour-Omatic Coffee Brewer will enhance your enjoyment of each cup of coffee. Bunn® coffee brewers are recognized in homes and restaurants throughout the world as the very finest. Read this booklet, and in no time you will know how to make a great cup of coffee. ® Keep this booklet for future reference If you need assistance, please call us at 2866 1-800-352- BUNN UL ® 10070.
Our best wishes for your coffee enjoyment. Table of Contents IMPORTANT SAFEGUARDS ........................................... 4 GENERAL INFORMATION .............................................. 5 PREPARING THE BREWER FOR USE ............................ 6 BREWING DELICIOUS COFFEE ...................................... 7 HOT WATER .................................................................. 7 COFFEE FUNDAMENTALS .............................................. 8 BREWING TIPS ...........................
Bunn Pour-Omatic® MODEL A-10 COFFEE BREWER LID HOT WATER TANK (LOCATED INSIDE) WARMER SWITCH BREW FUNNEL VACATION SWITCH DECANTER P2076 WARNING RISK OF FIRE OR ELECTRICAL SHOCK Hazardous Voltage! Can Cause Fire Or Electrical Shock! Do Not Disassemble The Brewer! There Are No User Serviceable Parts Inside! Repair Should Be Done By Authorized Service Personnel! (Refer to Page 10) This symbol alerts you to the risk of fire or electrical shock in the accompanying message.
IMPORTANT SAFEGUARDS Follow these basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and/or personal injury: • • • • • • • • Read all instructions. Do not touch hot surfaces. Use handles or knobs. Do not place cord, plugs, or brewer in water or liquid. Close supervision is necessary when the brewer is used by or near children. Unplug from outlet when not in use and before cleaning.
GENERAL INFORMATION NOTE - THE BREWER IS NOT READY TO PLUG IN Improper installation will result in permanent damage and void the limited warranty. Read & follow the instructions on the next page. • • • • • • Be certain the tank is full of water before plugging in the brewer. (Requires at least three quarts to fill). This brewer is designed to remain plugged in at all times (except during initial installation or when cleaning.
PREPARING THE BREWER FOR USE NOTE - THE BREWER IS NOT READY TO PLUG IN Raise the hinged flip lid. P2078 Place the decanter on the warmer. Pour two pitchers of water (filled to the top line) into the screened area on top of the brewer. Wait two minutes between pitchers to allow the water to fill the tank. When the tank is full, some water will flow through the funnel and into the decanter. P2079 Close the lid and plug in the brewer.
BREWING DELICIOUS COFFEE Insert a Bunn® coffee filter into the brew funnel. (Be sure to use Bunn® coffee filters for proper brewing. There is a difference.) P-206 Measure coffee into the filter and gently shake to level the bed of grounds. P-205 Make sure that the sprayhead is tight. Slide the brew funnel into the brewer under the warmer switch. Snap the decanter cover in the decanter and place the decanter on the warmer beneath the brew funnel. Place the lighted warmer switch in the “ON” position.
COFFEE FUNDAMENTALS Brewing delicious coffee is similar to cooking any favorite food. Both require a good recipe. Proper coffee-making needs quality equipment to precisely control water temperature, volume, and brew time. The Bunn® coffee brewer assures consistency in your recipe by controlling all of these elements. The only variables remaining in the recipe are the grind and amount of coffee used. The amount of ground coffee is generally determined by the grind.
ROUTINE CLEANING Rinsing the brew funnel and decanter after each use is the only routine cleaning required. Occasionally, wipe the outside of the brewer including the area above the funnel with a damp cloth. (The brew funnel, hot water funnel and decanter are top rack dishwasher safe.) P2083 HANDLE MAINTENANCE Using a phillips screw driver, periodically tighten the screw in the handle.
DRAINING THE BREWER The water in your Bunn® Coffee Brewer should be emptied whenever it is taken on a trip, shipped, or stored in an unheated location with a chance of freezing. 1) Unplug the brewer and cool the hot water in the tank. Place the empty decanter on the warmer. Simply pour a full water pitcher of cold water into the top of the brewer, close the lid and wait for the water to stop flowing from the funnel. Empty the decanter, repeat. This will cool the water in the tank.
BUNN® COMPANION PRODUCTS EASY TEATM PITCHER Now the delicious taste of fresh brewed iced tea is available with a convenient accessory to all Bunn® home model coffee brewers. The contemporary design of the Bunn® Easy TeaTM Pitcher is sure to enhance any decor. COFFEE & TEA FILTERS Constant quality testing assures consistency from pot to pot. The best flavor without any grounds in the cup.
WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants the equipment manufactured by it to be commercially free from defects in material and workmanship existing at the time of manufacture and appearing within one year from the date of installation. In addition: 1) Bunn warrants electronic circuit and/or control boards to be commercially free from defects in material and workmanship for two years from the date of installation.