TCD-1/2 INSTALLATION & OPERATING GUIDE With ILLUSTRATED PARTS NOTE: LIFT THE DISPENSER USING THE HANDLES ONLY. DO NOT LIFT THE DISPENSER FROM THE BOTTOM. BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS 62708-3227 PHONE: (217) 529-6601 FAX: (217) 529-6644 To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at www.bunn.com.
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor. 2) All other equipment - 2 years parts and 1 year labor plus added warranties as specified below: a) Electronic circuit and/or control boards - parts and labor for 3 years.
INTRODUCTION These dispensers are designed to mix liquid tea concentrate with water to produce iced tea by the glass or pitcher. The concentrate can be stored either inside the dispenser, or outside with a hose connection to the dispenser. The dispenser must be placed on a sturdy counter or shelf. PLUMBING REQUIREMENTS This dispenser must be connected to a cold water system with operating pressure between 30 and 90 psi (138 and 620 kPa) from a 1⁄2" or larger supply line.
SET UP AND OPERATING PROCEDURES 1. Remove dispenser from the box and place on a sturdy, level counter. 2. Remove the brass cap and any packing material from the end of the water inlet fitting located on the rear of the dispenser. 3. Attach a 1/4" water line to the inlet fitting. This supply line must have at least 30 psi of pressure. 4. Using a screwdriver, turn the adjustment screw on the venturi mixer clockwise until the screw contacts the seat (DO NOT OVERTIGHTEN THIS SCREW!). 5.
DISPENSER CLEANING AND SANITIZING Daily Cleaning: 1. Turn handle on rear of dispenser to shut off the water supply. 2. Open the faucet to relieve pressure in the system. 3. Since the bag connector(s) have an internal shut off valve, it will be necessary to prop the valve open during cleaning. NOTE: Cutting off the mating connector of an empty concentrate bag works well for this. Keep this mating end for future cleanings of the system. 4. Turn on water supply to the dispenser. 5.
TCD-1 TCD-2 REPLACEMENT PARTS (TCD-1) 56 57 59 58 57 43 .375" BIB Adapter 42 Concentrate Bottle Tube 20 24 26 25 46 47 18 15 19 17 16 6 7 19 23 14 13 12 11 10 21 30 20 22 31 32 20 52 4 5 26 27 28 29 Early Models 54 3 1 45 20 20 61 2 44 34 35 51 33 53 8 9 36 37 38 39 60 41 40 49 47 48 50 55 Early Models P3457.
REPLACEMENT PARTS (TCD-1) ITEM PART NO. QTY. DESCRIPTION NOTE: Effective August 2006, the Venturi and product delivery tubing was changed from .25"ID to .375"ID to improve flow rate. If for first replacement, order Tube Replacement Kit P/N 39169.0000 (2 kits required for TCD-2) 1 23820.1000 1 Water Strainer Assy (Includes items 2 thru 4) 2 22249.0000 1 Cap, Water Strainer 3 23721.0000 1 Screen 4 23819.0000* 1 Housing (Order item 1) 5 00310.
TCD-1 TCD-2 REPLACEMENT PARTS (TCD-1) (continued) 56 57 59 58 57 43 .375" BIB Adapter 42 Concentrate Bottle Tube 20 24 26 25 46 47 18 15 19 17 16 20 6 7 19 23 14 13 12 11 10 21 30 20 22 31 32 20 52 4 5 26 27 28 29 20 54 3 1 45 Early Models 61 2 44 34 35 51 33 53 8 9 36 37 38 39 60 41 40 49 47 48 50 55 Early Models P3457.
REPLACEMENT PARTS (TCD-1) ITEM PART NO. QTY. DESCRIPTION 27 - - - - - - - - 1 Venturi Mixer (Order item 23) 28 37691.0000 1 O-ring 29 37486.0000 1 Adjustment Screw, Venturi 30 32852.0000 1 O-ring 31 03093.0001 01268.0000 1 1 Wing Nut, Faucet Chrome Nut, Faucet Union (Optional) 32 01221.0001 1 C-Ring, Faucet Shank 33 03260.
TCD-1 TCD-2 REPLACEMENT PARTS (TCD-1) (continued) 56 57 59 58 57 43 .375" BIB Adapter 42 Concentrate Bottle Tube 20 24 26 25 46 47 18 15 19 17 16 20 6 7 19 23 14 13 12 11 10 21 30 20 22 31 32 20 52 4 5 26 27 28 29 20 54 3 1 45 Early Models 61 2 44 34 35 51 33 53 8 9 36 37 38 39 60 41 40 49 47 48 50 55 Early Models P3457.
REPLACEMENT PARTS (TCD-1) ITEM PART NO. QTY. DESCRIPTION 53 00651.0000 1 Decal, BUNN 54 00656.0001 1 Decal, Plumbing Code 55 38839.0000 1 Stand (Optional) 56 26443.0000 34644.0000 1 1 Reducer, Barb .375" x .25" Connector, Barb .375" x .375" 57 12422.0001 2 Clamp, Hose .59"/.66" 58 37720.0000* 1 Tube, Silicone .375" ID x 3.0" (Order item 64) 59 37744.0000 37744.0001 1 1 Tube, Concentrate Bottle .25" Tube, Concentrate Bottle .
TCD-1 TCD-2 REPLACEMENT PARTS (TCD-2) 62 63 50 47 48 49 48 Concentrate Bottle Tube 51 .375" BIB Adapter 48 46 Bag Divider 28 29 56 60 23 21 18 24 17 19 20 24 22 15 65 7 64 35 34 36 25 55 8 24 27 14 13 12 11 10 6 29 31 32 33 Early Models 25 16 30 58 26 48 57 37 59 9 40 41 42 43 2 45 3 1 4 5 38 39 53 61 54 52 44 60 Early Models P3462.
REPLACEMENT PARTS (TCD-2) ITEM PART NO. QTY. DESCRIPTION NOTE: Effective August 2006, the Venturi and product delivery tubing was changed from .25"ID to .375"ID to improve flow rate. If for first replacement, order Tube Replacement Kit P/N 39169.0000 (2 kits required for TCD-2) 1 23820.1000 1 Water Strainer Assy (Includes items 2 thru 4) 2 22249.0000 1 Cap, Water Strainer 3 23721.0000 1 Screen 4 23819.0000* 1 Housing (Order item 1) 5 00310.
TCD-1 TCD-2 REPLACEMENT PARTS (TCD-2) (continued) 62 63 50 47 48 49 48 Concentrate Bottle Tube 51 .375" BIB Adapter 48 46 Bag Divider 28 29 56 60 23 21 18 24 17 19 20 24 22 15 65 7 64 35 34 36 25 55 8 24 27 14 13 12 11 10 6 29 31 32 33 Early Models 25 16 30 58 26 48 57 37 59 9 40 41 42 43 2 45 3 1 4 5 38 39 53 61 54 52 44 60 Early Models P3462.
REPLACEMENT PARTS (TCD-2) ITEM PART NO. QTY. DESCRIPTION 30 32849.0001 2 O-ring 31 - - - - - - - - 1 Venturi Mixer (Order item 27) 32 37691.0000 1 O-ring 33 37486.0000 1 Adjustment Screw, Venturi 34 03093.0001 01268.0000 2 2 Wing Nut, Faucet Chrome Nut, Faucet Union (Optional) 35 32852.0000 2 O-ring 36 01221.0001 2 C-Ring, Faucet Shank 37 03260.
TCD-1 TCD-2 REPLACEMENT PARTS (TCD-2) (continued) 62 63 50 47 48 49 48 Concentrate Bottle Tube 51 .375" BIB Adapter 48 46 Bag Divider 28 29 56 60 23 21 18 24 17 19 20 24 22 15 65 7 64 35 34 36 25 55 8 24 27 14 13 12 11 10 6 29 31 32 33 Early Models 25 16 30 58 26 48 57 37 59 9 40 41 42 43 2 45 3 1 4 5 38 39 53 61 54 52 44 60 Early Models P3462.
REPLACEMENT PARTS (TCD-2) ITEM PART NO. QTY. DESCRIPTION 58 38466.0000 1 Decal, Shut-off 59 00651.0000 1 Decal, BUNN 60 38278.0002* 2 Edging 36.0" (Order item 73) 61 38839.0000 1 Stand 62 38745.1000 1 Bag Divider (Includes Item 63) 63 38278.0001* 38278.0003* 1 2 Edging 9.5" (Order item 72) Edging 1.0" (Order item 72) 64 39216.0000 1 Screen Filter (Late Models) 65 27574.
ICED TEA DECAL PLACEMENT APPROX. 5“ PLASTIC BODY FAUCET COMPARISON If you have a plastic body faucet of this design, you must order a complete new plastic faucet.