Specification Sheet

BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Last Updated:
06/16/2020
CWTF15-3, PF (3 Lower Warmers)
Server(s) sold separately
All stainless steel construction
Hot water faucet (requires active plumbing connection)
Pourover feature
SplashGard® funnel deflects hot liquids away from the hand
PROP 65 Warning Decal included in packaging with equipment
Servers not included unless otherwise noted
Agency:
Specifications Additional Features
12950.0212Product #: UpperFaucet: Low Profile
PlumbedWater Access: Three LowerWarmers: Pourover Option
Stainless
Finish:
Black PlasticFunnel:
WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Height: 17.3" Width: 16.4" Depth: 21.4"
(43.9cm) (41.7cm) (54.4cm)
Electrical & Capacity
Volts* Amps Watts
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
Phase
# Wires
plus Ground
Hertz
120 13.9 1670 Yes NEMA 5-15P 62
60°F (15.5°C)
1 2 60
*When a BUNN is machine rated 120/208-240V, 120/208V or 120/240V, the higher voltage is the supply voltage needed to power the machine. The 120V is there to supply power to some components rated 120V in the machine, but it is not the supply voltage
and would not power the machine if the machine is marked with the before mentioned ratings.
Plumbing Requirements CAD Drawings
PSI kPa
Fitting Supplied
Water Flow Required (GPM)
20-90 138-621
1/4" Male Flare Fitting
-
2D
Revit
KLC

Summary of content (4 pages)