Specifications

Page 12
29877 121302
PROGRAMMING THE BREWER (cont.)
PROGRAM FUNCTIONS - LEVEL 2
There are three methods of programming the vari-
ous brewing parameters of the Dual SH with Smart
Funnel
®
Brewer.
METHOD 1:
Using a Smart Funnel and a G9-2T DBC Grinder:
Certain coffee NAMES are stored in the G9-2T
DBC's memory. When a particular name of coffee
is ground into the Smart Funnel, that name and the
batch size selected are transferred from the grinder to
the programming chip located in the funnel's handle.
The funnel is then inserted into the brewer's left side
funnel rails. The sensor coil on the brewer reads the
information contained in the handle. This then allows
the operator to set the BREW VOLUMES, BYPASS
PERCENTAGES, PULSE BREW TIMES, PREINFUSION
TIMES and DRIP-OUT TIMES for that particular coffee
NAME. Each coffee NAME can be set individually to
provide optimum brewing quality.
METHOD 2:
Using a RECIPE CARD to enter all of the brew set-
tings at one time:
If using a coffee name not in the G9-2T DBC's
memory, the customer can obtain a RECIPE CARD
from the factory with all the information needed to
set up that particular coffee flavor. This includes the
COFFEE NAME, BREW VOLUMES, BYPASS PERCENT-
AGES, PULSE BREW TIMES, PREINFUSION TIMES,
and DRIP-OUT TIMES.
METHOD 3:
Not using a Smart Funnel and/or a G9-2T DBC
Grinder:
This allows the operator to enter ONE set of brewing
parameters for each side, in the event a Smart Fun-
nel
®
and/or a G9-2T DBC is not used with the Dual
®
SH Brewer. This is referred to as a NO NAME coffee
flavor. If the brewer does not read the information in
the funnel's handle, it automatically selects the NO
NAME brewing parameters set up prior to brewing.
This includes the BREW VOLUMES, BYPASS PERCENT-
AGES, PULSE BREW TIMES, PREINFUSION TIMES
and DRIP-OUT TIMES for the three batch sizes.
ARE YOU CREATING OR CHANGING A RECIPE FOR A
COFFEE NAME PREVIOUSLY USED IN THIS BREWER?
REFER TO NAME LIST
IN GRINDER MANUAL
CONTACT BUNN-O-MATIC
FOR ASSISTANCE
GO TO REVIEW RECIPES
AND FOLLOW INSTRUCTIONS
TO VIEW A LIST OF EXISTING RECIPES,
GO TO REVIEW RECIPES
AND FOLLOW THE INSTRUCTIONS
GO TO SET NEW RECIPE,
AND FOLLOW THE
INSTRUCTIONS
YOU WILL ENTER
THE NO NAME LEFT
AND NO NAME
RIGHT BREW
SETTINGS
YOU WILL MODIFY AN
EXISTING RECIPE
DOES THE GRINDER HAVE THE
NAME IN ITS MEMORY?
FOLLOW INSTRUCTIONS
ON THE RECIPE CARD
HAVE YOU RECEIVED A RECIPE CARD
CONTAINING THE NEW RECIPE?
OR
OR
NO
NO
DON'T KNOW
NO
YES
YES
YES
DON'T
KNOW
RECIPES
This diagram allows for the creating, modifying,
or viewing of recipes in the brewer.
P2369