Specifications

Page 27
COPY SETTINGS (NO NAME COFFEE SETTINGS
ONLY)
This function is used to transfer all the brew set-
tings from a NO NAME coffee flavor programmed on
one side of the brewer to the other side. A NO NAME
coffee is a flavor that is not in the grinder's memory
or is what appears if a Smart Funnel is not used.
For example, once the left side's 3 batch sizes are
programmed (brew volumes, bypass percentages,
pulse brew times, pre-infusion times, and drip-out
times) for a particular NO NAME coffee, all the data can
be transferred from the left side of the brewer to the
right side in one step. The data can also be transferred
from right to left, if the right side had been the initial
set-up side. This results in less set-up time.
If two different NO NAME setups are required,
one on the left, the other on the right side, it is not
recommended that this function be used.
Procedure to copy settings:
1. Press and hold the ® pad until the display reads
SET RECIPES. Release the ® pad. Continue to
press and release the ® pad until the display reads
EXIT TO
NEXT FUNCTION
SCREEN
COPY LEFT
SIDE SETTINGS
TO RIGHT SIDE
COPY RIGHT
SIDE SETTINGS
TO LEFT SIDE
EXIT TO
NEXT FUNCTION
SCREEN
COPY SETTINGS?
NO YES
LEFT ->->-> RIGHT
NO YES
LEFT <-<-<- RIGHT
NO YES
ARE YOU SURE?
NO YES
TRANSFER
COMPLETE
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
29877 022509
P2298
COPY SETTINGS.
2. Press YES in this screen. The display should read
LEFT >>> RIGHT.
3. If the initial programming was done on the left side
of the brewer, press YES. The display will read ARE
YOU SURE?
4. If you are sure that the data should be transferred
from left to right, press YES. The display will then
read TRANSFER COMPLETE, and will automatically
advance to the next function screen.
5. In the LEFT >>> RIGHT screen, if the program-
ming was done on the right side and it is desired
to transfer from right to left, press NO. The display
will then read LEFT <<< RIGHT .
6. If the initial programming was done on the right
side of the brewer, press YES. The display will read
ARE YOU SURE?
7. If the data should be transferred from right to left,
press YES. After the data is transferred, the display
will read TRANSFER COMPLETE. This will appear
for 3 seconds, then will exit to the next function
screen. Brew settings for all flavors are not the
same on both sides of the brewer, only the NO
NAME setting has been transferred.