Use and Care Manual

19
SITUATION EXPLANATION
The BUNN
®
(POD HOLDER
RELEASE BUTTON)
indicator is not on all of
the time.
The HEATING INDICATOR
comes on when the
COFFEE or TEA button is
pressed.
The HEATING INDICATOR
comes on during a brew
cycle.
When the BUNN
®
button (Also known
as the POD HOLDER RELEASE BUTTON)
is lit, this indicates that the power to the
machine is on.
No action is required. The BUNN
®
Pod
brewer is ready to brew.
When the brewer enters a sleep mode
the POD HOLDER BUTTON will not be
glowing.
Pressing any button or the POD HOLDER
RELEASE BUTTON will wake up the
brewer.
NOTE: If the brewer does not operate,
refer to the first situation listed in the
beginning of this troubleshooting section,
on page 16.
The HEATING INDICATOR will glow when
the tank is bringing water up to brew
temperature.
Wait for the HEATING INDICATOR to go
out. When the Indicator has gone out, a
brew cycle can be started.
The water entering the internal tank is
being heated for the next brew cycle.
No action is required. As the heated
water is being emptied to brew a
serving, new water enters the internal
tank. The brewer senses this new water
and activates the tank heater to heat
the water for the next brew cycle. The
indicator coming on during a brew cycle
is normal.