assembly Instructions

WinSafe WS 44 English | 13
A. General instructions
The window protection WS44 is approved by
VdS 2536 and tested according to DIN 18104-1.
According to DIN 18104-1 at least one additional
protection should be mounted on each side
for every 1 m window height.
On the operating side (handle
side) at least one additional
protection must be lockable.
The borehole depths and screw lengths must be
matched according to local conditions. Do not
pierce the windows / French doors, eventually
work with a drill stopper. When drilling do not
damage any moving parts, seals or glass panes.
The mounting screws should be tightened by
hand to avoid overtighting.
For any possible injuries and / or damages
caused by improper handling during
assembly, the manufacturer accepts no
liability.
As an additional safety measure in case of
plastic elements and possibly for aluminum and
wooden elements, we recommend using the
BURG-WÄCHTER mounting anchor MA 99 DUO.