Instructions

28 | English BURGcam DOME 303 BURGcam DOME 303 English | 29
Description
WiFi antenna
Waterproof ring
Reset: Press and hold the button for approx. 8 seconds
until the control LED extinguishes in order
to reset the camera configurations to factory
default settings.
WPS: Press this button once quickly to connect
the camera to the corresponding WLAN router.
Micro SD card slot
Status indicator light
Red: Booting
Green slowly flashing: Booting completed; waiting for
WiFi connection
Green quickly flashing: WiFi connection in progress
Green: WiFi connection successful;
normal operation
Red and green lights
flashing alternately: Camera upgrade
Red slowly flashing: Network connection failed or
disconnected
Red quickly flashing: Camera malfunction, booting failed,
alarm or SD card malfunction
Wall / ceiling mount
•
Screw off the dome cover from the dome body using the supplied
Allen wrench.
•
Use the supplied screws, anchors and stencil sticker to fix the
dome body in the desired location. Please ensure that the ground
is strong enough to carry at least 3x the camera’s weight.
•
Loosen the little fixing screw on the lens and adjust the lens
position according to your needs. Then tighten the fixing
screw again.
•
Screw the dome cover back on the dome body.