Instructions

42 | English BURGcam DOME 303 BURGcam DOME 303 English | 43
•
An appliance which is powered through a polarized plug (a plug
with one blade wider than the other) will fit into the power outlet
only one way. This is a safety feature. If you are unable to insert
the plug into the outlet, try reversing the plug. Do not defeat the
safety purpose of the polarized plug.
•
If the appliance is powered through a grounding-type plug, the
plug will only fit into a grounding-type power outlet. This is a
safety feature. If your outlet does not have the grounding plug
receptacle, contact your local electrician.
Route power cords and cables in a manner to protect them from
damage by being walked on or pinched by items places upon or
against them.
•
For protection of the appliance during a lightning storm or when
it is left unattended and unused for a longer period, unplug the
appliance from the wall outlet. Disconnect any antennas or cable
systems that may be connected to the appliance. This will prevent
damage to the appliance due to lightning or power-line surges.
•
Do not overload wall outlets and extension cords as this can result
in a risk of fire or electric shock.
•
Never insert items into the openings of the appliance.
They may touch parts under electric current which may cause
an electric shock.
•
Never pour any liquids over the appliance.
•
In case of any operating interruption or a complete operating
failure please switch off the appliance and disconnect it from
the wall outlet. Never attempt to service or repair the appliance
yourself, as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
•
When replacement parts are required, be sure that the service
technician uses replacements parts specified by the manufacturer
or that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or
other hazards.
•
Upon completion of any service or repairs to the appliance, ask
the service technician to perform safety checks to verify that the
appliance is in proper operating condition.
•
The appliance must only be installed by qualified service personnel
and has to comply with local specifications and regulations.
•
Never point the camera at an object with a high degree of
luminance. Bright vertical or horizontal lines can result in a
distortion (outshine) of the entire image on the monitor. This
artifact is not an error but a particularity of semiconductor CCDs
when they are directly exposed to a powerful light source.
•
At the installation site, the camera has to be adjusted to the
given light.
•
Please respect the local legal regulations on waste if you need to
dispose of discarded appliances.
For cameras equipped with IR LEDs:
Please make sure to always keep a distance of > 1m to
avoid damages to your health. Never look directly into
the IR-LEDs – this may cause eye damages!