PointSafe FS en User Manual BA PointSafe FS dp 02/2015 www.burg.
Structure Dear customer, Thank you for buying a PointSafe FP. This safe was developed and manu factured by Burg-Wächter using the latest fingerprint sensor technology. This Fingerprint (FP) PointSafe has been designed to be used in both standard and hotel modes. In addition to the keypad and Fingerprint reader, this safe comes with mechanical emergency override key. Important: Please read the entire User Manual before you start programming. We hope you enjoy your new BURG-WÄCHTER Fingerprint safe.
Programming PointSafe FP in Standard Mode Changing user code – Press “On / Enter”. – Then enter the user code. The door automatically opens. – Hold the “On / Enter” button until the yellow “Entry / Programming“ LED flashes. – Enter the new code (3 to 6 digits). – Confirm it with “ON / Enter”. Entering Programming Mode to Change Master Code and adding Fingerprints Press “On / Enter“, then type 76 (program mode), then press “On / Enter” and enter Master code. The door will automatically open.
