Instructions
Scan & Lock 610 / 53
English I 11
Open with ngerprint
Set administrator account
1. Press shackle once 2. Press ngerprint pad
around 1s
1. Press shackle once 2. Press ngerprint pad
around 3s
3. Input administrator
ngerprint 10 times
„Blue“ shining:
Successful (with a long
beep)
„Red“ shining:
Failed (with 4 beeps)
„Blue“ ashing
„Blue“ ashing
„Blue“ ashing
„Blue“ shining,
with 4 beeps
„Blue“ shining,
with 3 beeps
„Blue“ shining
„Red“ shining
To activate, press the shackle
1x upwards (Fig. 1).
To open: place your nger
on the sensor (Fig. 2).
Note: At the factory and in delivery condition, the lock can be opened
with any ngerprint. The lock is individualised when it is set by the
administrator.