User Manual

Page 7
Turning o the Fogger
When you have nished fogging:
1. Push the trigger lock to the right to lock the trigger.
2. Allow the insecticide already in the coil to completely fog out. This will take 2 to 3
minutes.
3. When the fog being emitted becomes sporadic, unplug the unit.
4. Let the fogger cool o completely before storing.
Storage
1. Empty insecticide from the container before storing.
2. When storing the units for a long period of time, ush out the insecticide container
and the Fogger by pumping kerosene through the system. DO NOT PLUG IN UNIT.
This will safeguard against insecticide corrosion or clogging, and will insure top
performance.
3. Store Fogger and insecticide indoors, away from children.
Care and Maintenance
1. Insecticides provide lubrication for the Fogger's pump so no additional lubrication is
necessary.
2. If the nozzle or coil should become clogged, remove and clean nozzle with a small
diameter wire. With nozzle end pointed toward oor, insert wire in coil to check for
and remove carbon build up.
OPERATING INSTRUCTIONS CONTINUED
STORAGE /MAINTENANCE
Helpful Hints
If your extension cord is not long enough to reach the entire area you wish to fog
then:
1. Simply unplug the fogger and proceed to the area.
2. While fogging with unit unplugged, squeeze trigger every ve seconds and fog
the area necessary.
3. Fogger will stay hot enough to fog for approximately 2 minutes after being
unplugged.
4. If more time is needed to cover area, then plug fogger in and allow 3 to 4 minutes
to heat up again.
5. Repeat these steps as many times as necessary to fog desired area.