Datasheet

4 Burgess switches [e-mail]
V3NS
Operating Characteristics
Actuating Force Release Force Free Position Operating Position Movement Differential
Actuator Reference Maximum Minimum Maximum Maximum
(N) (ozf) (N) (ozf) (mm) (in) (mm) (in) (mm) (in)
Plunger V3NSUL 2.2 8.0 0.4 1.4 16 0.63 14.7 ± 0.4 0.58 ± 0.016 0.25 0.01
V3NST1UL
V3NST3UL
Y1 lever V3NSY1UL 1.3 4.7 0.2 0.7 19 0.75 16.3 ± 0.85 0.64 ± 0.034 1.1 0.05
V3NST1Y1UL
V3NST3Y1UL
YR lever V3NSYRUL 2.6 8.0 0.4 1.4 22.5 0.89 21.0 ± 0.45 0.83 ± 0.018 0.28 0.013
V3NST1YRUL
V3NST3YRUL
YR1 lever V3NSYR1UL 1.6 4.7 0.2 0.7 24.1 0.95 21.7 ± 0.8 0.85 ± 0.032 0.5 0.02
V3NST1YR1UL
V3NST3YR1UL
YC lever V3NSYCUL 1.6 4.7 0.2 0.7 23 0.91 19.45 ± 0.8 0.77 ± 0.032 0.5 0.02
V3NST1YCUL
V3NST3YCUL
Operating characteristics are specified from the lower mounting hole
Overtravel: Plunger can be depressed flush with housing. The housing should not be used as an end stop
Basic type V3NS
Terminals No symbol, pre-wired with standard 300mm cables
T1 6.4 x 0.8 Faston
T3 4.8 x 0.5 Faston
Circuit No symbol, change-over
C2 Normally closed
C4 Normally open
Actuators No symbol, without lever or actuator
Y1 Plain lever 35mm
YR Roller lever 20mm
YR1 Roller lever 32mm
YC Cam follower lever 32mm
Contact Material No symbol. Ag
Approvals No symbol, without approval
UL UL, CSA, ENEC Approval
Special Features /n n n n Burgess specialise in customer specific solutions
Additional product variants are available or can be provided
If your requirements cannot be satisfied from the options listed,
please contact www.saia-burgess.com or your local SB outlet.
Ordering Reference
Example: V3NS T3 C2 Y1 UL
Miniature sealed
Widt of lever 4.74
Widt of lever 4.74
Widt of roller 6.1
Widt of roller 6.1
4.75
20
35
4.7500
32
32
Ø2.37