Data Sheet

ManualsBrandsBürkert ManualsAutomation & PneumaticsBürkert Directly actuated valve 163592 6012 24 V DC Enclosure material Stainless steel Sealant FKM 1 pc(s)

Table Of Contents

Type 6012

Visit product website 

DATA SHEETDATA SHEET

Type 2507



Cable plug - industry

standard plug Form B

Type 2516



Cable plug DIN EN

175301-803 - form C

1000011028 | Standard | EU | en | 202101 | 14

Plunger valve 3/2way direct-acting

• Direct-acting, compact small-format valve with diameter of up to

DN 1.6

• Screwed coil system

• Banjo threaded connection for direct mounting on pneumatic

valves

• Simpleandquickpush-in,ange,ormanifoldinstallation

• Service-friendly manual override

Valve 6012 is a direct-acting plunger valve. The stopper and plunger guide

tube are welded together to enhance pressure resistance and leak-tightness.

Various seal material combinations are available depending on the applica-

tion.ABürkert-specicangedesign(SFB)enablesspace-savingarrange-

mentofvalvesonamanifold.Push-inttingscanbeselectedforexiblehose

connection. A banjo connection with banjo bolt is the ideal solution for easy

direct mounting on a pneumatic drive. Optional manual actuation enables

quick commissioning and optimal maintenance. In combination with a cable

plug in accordance with industry standard Form B or DIN EN 17301-803 Form

C, the valves satisfy protection class IP65.

Productvariantsdescribedinthedatasheetmaydierfromtheproductpresentationanddescription.

Type descriptionCan be combined with

Type 6012

Summary of content (14 pages)

PAGE 1
DATA SHEET Type 6012 Plunger valve 3/2 way direct-acting • Direct-acting, compact small-format valve with diameter of up to DN 1.6 • Screwed coil system • Banjo threaded connection for direct mounting on pneumatic valves • Simple and quick push-in, flange, or manifold installation • Service-friendly manual override Product variants described in the data sheet may differ from the product presentation and description.
PAGE 2
Type 6012 Table of contents 1. General Technical Data 3 2. Circuit functions 4 3. Materials 4 3.1. 3.2. 4. Dimensions 4.1. 4.2. 4.3. 5. 6 Standard version.....................................................................................................................................................................6 Version acc. to DIN EN 175301 - 803 Form C (cable plug Type 2516)....................................................................................6 PIN Assignments........
PAGE 3
Type 6012 1. General Technical Data Product properties Dimensions Detailed information can be found in chapter “4. Dimensions” on page 6. Material Body Seal Brass, polyamide (PA), stainless steel 1.
PAGE 4
Type 6012 2. Circuit functions Circuit functions Description Type: C, solenoid valve 3/2 way Direct-acting Normally closed Type: D, solenoid valve 3/2 way Direct-acting Normally opened 2(A) 1(P) 3(R) 2(B) 1(P) 3. 3(R) Materials 3.1.
PAGE 5
Type 6012 Banjo version 1 2 3 14 4 5 6 7 8 13 9 10 11 15 16 12 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 Element Pressure inlet P Locknut Stopper Shading ring Core Guide tube Spring O-Ring Spring Armature seal Pressure inlet P Banjo bold Sub-base 14 Coil 15 16 Hand lever Body Visit product website Material With circuit function D DIN 176 - 9SMnPb28K (surface Zn5glcA) Stainless steel 1.4105 Copper (silver optional) Stainless steel 1.4105 Stainless steel 1.4303 Stainless steel 1.
PAGE 6
Type 6012 4. Dimensions 4.1. Standard version Version acc. to DIN EN 175301 - 803 Form C (cable plug Type 2516) Note: Dimensions in mm ** ** 29 32.5 4 14.75 4 4.7 M5 20 20 8 X X 5 B C 14 4.7 20 *** * M3 4x M3.6 deep 14 A D D *** * Port connection Thread Thread Sub-base A M5 G⅛ – B 5 8 – C 20 25 20 D 14 19.
PAGE 7
Type 6012 Version acc. to industry standard connector Form B for cable plug Type 2507 6.4 14.75 3.1 8.9 Note: Dimensions in mm 10 10.6 12 Port connection Thread Thread Sub-base A M5 G⅛ – B 5 8 – C 20 25 20 D 14 19.5 11 4.2. Banjo version Version acc. to DIN EN 175301 - 803 Form C for cable plug Type 2516 Note: • Dimensions in mm • Push-in connection for compressed air: Pressure inlet P can be rotated through 360°. 20 SW17 3.5 54 25.3 47 G P L L G G⅛ G¼ 20 R10 R10 G 3.
PAGE 8
Type 6012 Version acc. to industry standard connector Form B for cable plug Type 2507 Note: Dimensions in mm Threaded port for compressed air Push-in connection for compressed air 54 G G⅛ G¼ 20 54 20 L 6.5 9.5 4.3. Multiple manifold Note: • Dimensions in mm • Made of aluminium, anodized • Can only be combined with versions Circuit function C (normally closed) 10 8 No. of valves 21 14 18 14 G1/8 2.
PAGE 9
Type 6012 5. Performance specifications 5.1. Power consumption Standard version Orifice KV value water [mm] 1.2 1.6 [m3/h]1.) 0.045 0.06 Pressure range Circuit Circuit function C function D [bar]2.) [bar]2.) 0…10 0…10 0…6 0…6 Coil power Power consumption Inrush Hold Response times3.) Opening Closing 4 W AC or 4 W DC 9 VA 4W [ms] 7…10 7…12 6 VA (4 W) 4W [ms] 9…12 7…12 1.) KV value: Flow rate value for water, measurement at + 20 °C, 1 bar2.) pressure at valve inlet and free outlet. 2.
PAGE 10
Type 6012 6.3. Ordering chart Standard version Note: • All valves with FKM seal and without cable plug • Further versions on request Circuit function Orifice Port connection [mm] KVvalue Pressure Voltage/ water range frequency [bar]1.) [V/Hz] [m3/h] Article no. Article no. Article no. Article no. Brass body Brass body St. st.
PAGE 11
Type 6012 Circuit function Orifice Port connection [mm] KVvalue Pressure Voltage/ water range frequency [bar]1.) [V/Hz] [m3/h] Article no. Article no. Article no. Article no. Brass body Brass body St. st. body PA body without with without with manual manual manual manual override override override override Solenoid Valve with threaded port or sub-base version with polyamide electrical coil acc. to industry standard connector Form B for cable plug Type 2507 – – – 1.2 M5 0.
PAGE 12
Type 6012 Banjo version Note: • All valves with PA body, NBR seal and manualoverride and without cable plug • Further versions on request Circuit function Orifice Pressure Voltage/ Article no. range frequency [V/Hz] [mm] [l/min] [bar]1.) Banjo version complete for direct mounting on pneumatic actuator with polyamide coil acc. to DIN EN 175301 - 803 Form C for cable plug Type 2516 1.
PAGE 13
Type 6012 6.4. Ordering chart accessories Multiple manifold Note: Detailed order information can be found in chapter “4.3. Multiple manifold” on page 8. Accessories for manifolds Accessory Blanking plug Features with seal ring, G ⅛ Article no. Cover plate for unused valves 005100  005041  Cable plug Type 2516 acc. to DIN EN 175301 - 803 Form C Note: • Delivery of cable plug includes a flat seal and a fixing screw. • Further versions of cable plug with circuitry acc.
PAGE 14
Bürkert – Close to You For up-to-date addresses please visit us at www.burkert.com Austria Belgium Czech Republic Denmark Finland France Germany Italy Netherlands Norway Poland Spain Sweden Switzerland Turkey United Kingdom Russia China Hong Kong India Japan Korea Malaysia Philippines Singapore Taiwan Canada USA United Arab Brazil Uruguay Emirates South Africa Australia New Zealand Credits, © and concept: Christian Bürkert GmbH & Co.