Data Sheet

ManualsBrandsBürkert ManualsAutomation & PneumaticsBürkert Directly actuated valve 163592 6012 24 V DC Enclosure material Stainless steel Sealant FKM 1 pc(s)

1/10www.burkert.com

6012

can be combined with…Type6012

Valve 6012 is a direct-acting plunger valve.

The stopper and plunger guide tube are

welded together to enhance pressure resist-

ance and leak-tightness. Various seal mate-

rial combinations are available depending

on the application. A Bürkert-specic ange

design (SFB) enables space-saving arrange-

ment of valves on a manifold. Push-in t-

tings can be selected for exible hose con-

nection. A banjo connection with banjo bolt

is the ideal solution for easy direct mounting

on a pneumatic drive. Optional manual ac-

tuation enables quick commissioning and

optimal maintenance. In combination with a

plug in accordance with DIN EN 17301-803

Form B or C, the valves satisfy protection

class IP65.

• Direct-acting, compact small-format valve with diameter of up to

DN1.6

• Screwed coil system

• Banjo threaded connection for direct mounting on pneumatic

valves

• Simple and quick push-in, ange, or manifold installation

• Service-friendly manual override

Plunger valve 3/2 way direct-acting

Cable plug industrial

standard form B

Type2507

Cable plug to

DIN EN 175301-803*

form C

Type2516

Standard

version

Banjo version

3/2 way direct-acting

solenoid valve, normally

closed

3/2 way direct-acting

solenoid valve, normally

open

2(A)

1(P) 3(R)

2(B)

1(P) 3(R)

Pressure data [bar]: Overpressure with respect to atmospheric pressure

* Previously DIN 43650

Technical data

Body material Brass, polyamide (PA), stainless steel 1.4305

Polyamide (PA)

Seal material

FKM / NBR

Medium Neutral gases and liquids (e.g. compressed air,

water, hydraulic oil, technical Vacuum)

neutral gases (z.B. compressed air)

Medium temperature

Type 6012

Type 6012, banjo version

- 10 to + 100 °C

- 10 to + 60 °C

Ambient temperature

Type 6012, banjo version

max. + 55 °C

- 10 to + 40 °C

Viscosity max. 21 mm²/s

Port connection

Type 6012

Type 6012, banjo version

M5, G ⅛, Flange

G ⅛, G ¼ and tube tting Ø 6 mm

Operating voltages 24 V DC

24 V / 50 Hz

110 / 230 V / 50 Hz

Voltage tolerance ± 10 %

Duty cycle/single valve

for block assembly on

multiple manifold

100 % continuous rating

Intermittent operation 60 % (30 min)

With 2 W coil 100 % (on request)

Electrical connection • Acc. to DIN EN 175301-803* Form C for cable plug

Type 2516

(see ordering chart for accessories)

• Acc. to DIN 43650 Form B (Industrial standard) for ca-

ble plug Type 2507 (see ordering chart for accessories)

• Flying leads on request

Manual override Optional, as a standard feature

(for Type 6012, banjo version)

Installation As required, preferably with actuator upright

Weight: Type 6012 / 6012P 125 g (G ⅛) / 135 g

Protection class IP65 with cable plug

Thermic isolation class

Coil

Polyamide class B

Epoxy class H

Circuit function C

Circuit function D

Summary of content (10 pages)

PAGE 1
6012 Plunger valve 3/2 way direct-acting • Direct-acting, compact small-format valve with diameter of up to DN 1.6 • Screwed coil system Banjo version Standard version • Banjo threaded connection for direct mounting on pneumatic valves • Simple and quick push-in, flange, or manifold installation Type 6012 can be combined with… Type 2507 Cable plug industrial standard form B Type 2516 Cable plug to DIN EN 175301-803* form C Valve 6012 is a direct-acting plunger valve.
PAGE 2
6012 Response times Type 6012 Orifice [mm] 1.2 KV value water [m³/h] 0.045 1.6 0.
PAGE 3
6012 Dimensions [mm] - Type 6012 Coil connection acc. to DIN EN 175301-803* Form C (Cable Plug Type 2516) 14.75 4 14.75 29 32.5 8.9 ** 4 4.7 M5 Coil connection acc. to DIN EN 43650 Form B Industrial standard (cable plug 2507) 6.4 3.1 8 *** A * 4x M3.6 deep 10 B 12 C 10.6 20 20 20 X 5 11 X M3 4.7 14 14 Port connection Sleeve Sleeve sub-base A M5 G⅛ - B 5 8 - C 20 25 20 D 14 19.
PAGE 4
6012 Ordering chart Type 6012: Solenoid valve in threaded port or sub-base version with polyamide electrical coil acc. to DIN EN 175301-803* Form C for cable plug Type 2516 Circuit function Orifice [mm] Port Connection KV value water [m³/h] Pressure range [bar] 1) C 3/2 way valve NC 2(A) 1(P) 1.2 M5 0.045 0 - 10 1.6 M5 0.06 0-6 3(R) 1.2 G⅛ 0.045 0 - 10 1.6 G⅛ 0.06 0-6 1.2 sub-base 0.045 0 - 10 1.6 sub-base 0.06 0-6 1.2 M5 0.045 0 - 10 1.6 M5 0.
PAGE 5
6012 Ordering chart Type 6012: Solenoid Valve with threaded port or sub-base version with polyamide electrical coil acc. to DIN 43650 Form B (Industrial standard) for cable plug Type 2507 Circuit function C 3/2 way valve NC 2(A) 1(P) Orifice [mm] Port Connection KV value water [m³/h] Pressure range [bar] 1) 1.2 M5 0.045 0 - 10 1.6 M5 0.06 0-6 1.2 G⅛ 0.045 0 - 10 1.6 G⅛ 0.06 0-6 1.2 sub-base 0.045 0 - 10 1.6 sub-base 0.06 0-6 1.2 M5 0.045 0 - 10 1.6 M5 0.06 0-6 1.
PAGE 6
012 Materials - Banjo version 13 11 8 10 7 5 4 9 3 2 15 6 12 14 1 1 Body PA (polyamide) 2 3 4 5 6 7 8 9 Armature seal O-Ring Guide tube Core Spring Shading ring Stopper Sub-base FKM FKM Stainless steel 1.4303 Stainless steel 1.4105 Stainless steel 1.4310 Copper (silver optional) Stainless steel 1.4105 Zn3 gl cC surface (brass version) Nickel-plated surface (St. st.
PAGE 7
6012 Dimensions [mm] - Type 6012, banjo version Version with coil connection acc. to DIN EN 175301-803* Form C (cable plug Type 2516) Threaded port for compressed air Push-in connection for compressed air 54 20 SW17 3.5 54 20 25.3 3.5 R10 47 P 6 47 G L L R10 G G L G⅛ 6.5 G¼ 9.5 G Pressure inlet P can be rotated through 360°. Version with coil connection acc. to DIN 43650 Form B Industrial standard (cable plug Type 2507) Threaded port for compressed air 54 G L G⅛ 6.5 G¼ 9.
PAGE 8
6012 Ordering chart Type 6012, banjo version: for direct mounting on to pneumatic actuator with polyamide coil acc. to DIN EN 175301-803* Form C for cable plug Type 2516 Circuit function Orifice [mm] Pressure inlet P (valve body) Service port A (banjo bolt) QNn value air [l/min] Pressure range [bar] 1) Voltage/ frequency [V/Hz] C 3/2 way valve NC 1.
PAGE 9
6012 Dimensionsfor manifolds (SFB) Multiple manifold 10 8 21 14 18 14 G1/8 2.5 C C B A M5 4.3 21 6 10 M3 ˇ 7.2 Ordering chart for mainfold Material Aluminium No. of valves A [mm] B [mm] C [mm] Article no.
PAGE 10
6012 Ordering chart for accessories Cable plug type 2516 to DIN EN 175301-803* form C Circuitry Voltage Article no. None (standard) 0 - 250 V AC/DC 303141  with LED 12 - 24 V AC/DC 303145  with LED and varistor 12 - 24 V AC/DC 303148  with rectifier, LED and varistor 12 - 24 V AC/DC 303142  • Supplied with cable plug: flat seal and fixing screw. • Other versions of cable plug with circuitry acc.