Data Sheet
1/7www.burkert.com
6213
can be combined with…Type6213
The 6213 EV valve is a servo-assisted so-
lenoid valve of the S.EV series. The spring
coupling of the diaphragm supports the
opening process of the valve. In its stand-
ard version, the valve is suitable for use
in liquids. A minimum dierential pressure
is required for complete opening. A spe-
cial version (HP00) which opens the valve
without dierential pressure is available for
gas and vacuum applications. Various dia-
phragm material combinations are available
depending on the application. The standard
brass housing satises all European drinking
water requirements. Lead-free or dezinci-
cation-resistant brass types are available
for other markets. The housing oering is
rounded out by a stainless steel version. For
reduced energy requirement, all coils can be
delivered with electronic power reduction. In
combination with a plug in accordance with
DIN EN 175301-803 Form A, the valves sat-
isfy protection class IP65 – in combination
with a stainless steel housing NEMA 4X.
• Servo-assisted diaphragm with diameter of up to DN40
• Spring coupled diaphragm opens without dierential pressure
• Vibration-proof, screwed coil system
• Damped design for quiet closing
• Compact construction with high ow rate
Servo-assisted 2/2 way diaphragm
valve
Type2508
Technical data
Orice Standard DN10 … 40 mm
HP00: DN13 … 20
Body material Brass acc. to DIN EN 50930-6, stainless steel 1.4408 (316),
nickel-plated brass (5 µm), gunmetal (external thread)
Inner part of valve
Brass body
Stainless steel body
Brass, stainless steel and PPS
Stainless steel and PPS
Seal material NBR, FKM, EPDM
Medium
NBR
FKM
EPDM
Neutral uids, water, hydraulic oil, oil without additives
Per-solutions, hot oils with additives
Oil and fat-free uids and gases
Ambient temperature Max. +55 °C
Medium viscosity Max. 21 mm
2
/s
Medium temperature
NBR
FKM
EPDM
-10 … +80 °C
0 … +90 °C with polyamide coil / 0 … 120 ºC with epoxy coil
-30 … +90 °C with polyamide coil
-30 … +100 °C with epoxy coil
Voltages Standard 024/DC, 024/50, 230/50, 110/50, 120/60
HP00: 24 V (50 … 60 Hz), 230 V (50 … 60 Hz)
Voltage tolerance ±10 %
Duty cycle 100 % continuous rating; KD coil 50 % max. rating 6 circuit
switches/minute
Electrical connection Tag connector acc. to DIN EN 175 301-803 Form A
(see ordering chart for accessories, page 7)
Protection class IP65 with cable plug
Installation As required, preferably with actuator upright
Circuit function A
2/2 way servo-controlled
solenoid valve,
normally closed
2 (A)
1 (P)
1)
Measured at valve outlet at 6 bar and +20 °C
Opening: pressure build-up 0 … 90 %
Closing: Pressure drop 100 … 10 %
Response times
1)
0.1 … 4 sec.
(depending on orice and dierential pressure)
Contents:
Page
Technical data 1-2
Dimensions 3-4
Ordering chart 5-6
Accessories 7