User guide

1150 - 13
SYSTEM DESCRIPTION
Controller
Color screen
Electrical data
Interface COM1
Interface COM2
Interface type PC-Interface or RS 422/RS 485
Protocol MOD-Bus
Baud rate 9600, 19200, 38400
Device address 1 to 255
Minimum response time 0 to 500 ms
Supply voltage (switchmode PSU) AC 48 to 63 Hz, 110 to 240 V -15/+10%
Electrical safety to DIN EN 61 010, Partl 1
overvoltage category III, pollution degree 2
Power consumtion max. 30 VA
Data backup flash memory
Electrical connection at rear, via plug-in screw terminals
conductor cross-selection max. 2.5mm
2
with core ferrules (length: 10mm)
Electromagnetic compatibility
interference emission
interference immunity
EN 61 326
Class B
to industrial requirements
Controller type single-setpoint controller
double-setpoint controller, modulating controller, proportional controller,
proportional controller with integrated actuator driver
Controller structures P/PD/PI/PID/I
A/D converter dynamic resolution up to 16 Bit
Sampling time 250 msec
50 msec, 150 msec, 250 msec (configurable)
Resolution 320 x 240 pixels
Size (screen diagonal) 5" (12.7 cm)
No. of colors 27 colors
MOD bus
Interface type RS 422/RS 485
protocol MOD-Bus
Baud rate 9600, 19200, 38400
Device address 1 to 255
Profibus DP
Device address 1 to 128
Data transmission rate 12 MBaud