User guide

88 - 1150

OPTIMIZATION

Starting self-optimization

Start at the operating level

Select the controller channel in

/ Operation level / Self-optimization / Controller number 1 to 4

Start self-optimization for the selected controller channel with

/ Status / „Active“

Start from the operating loop

Change the screen template for the required controller channel with (press repeatedly, if

necessary!)

Press

Start self-optimization for the required controller channel with

Pressing resets the significance of the softkeys.

The controller outputs types have to be defined for self-optimization. They also have to be

enabled for the corresponding controller channel for self-optimization to start.

(see Chapter „

Controller

“).

NOTE

Canceling self-optimization

Switch the “Status” parameter at the operating level to “inactive” or press again.