User Manual

10
Installation
→ Mount the hose connection as shown in the illustration.
Ferrule
Fitting
Hose
Fig. 3: Structure UNF ¼ - 28 for fluid connection
7.4 Installation
Any installation position
→ Screw the device into place.
Use the respective bores for the M3 screws
(see “Fig. 4: Installation”).
Flanged design: Design with connection
thread UNF ¼-28:
11,8
7
34,5
M 3
max. ø2,5
Flanschbild für Anschlußplatte
min. t=6
M 3
20.5
Fig. 4: Installation
7.5 Electrical connection
Note the voltage as specified on the rating plate!
→ Connect the device electrically.
See chapter “8.5 Selecting the operating mode / pin
assignment”, page 13.
english
Type 7615