Manual

12
Start-Up

To reverse the flow direction, exchange the control of valve 1 and
valve 3 (For valve configuration, see figure "Installation").

Connection type: Rectangular
connector stranded wire 200 mm
(Other designs on request).
Note the voltage as specified on the type plate!
Connect the device electrically.
→
The individual valves must be activated consecutively (refer
to the control diagram in chapter "Start-up / Functions").


Warning!

Improper operation may result in injuries as well as damage to the
device and the area around it.
Before start-up, ensure that the operating personnel are familiar •
with and completely understand the contents of the operating
instructions.
Observe the safety instructions and intended use.•
Only adequately trained personnel may operate the equipment/•
the device.

Adjustment screw
Fastening screw

Reduce flow rate Increase flow rate
Turn clockwise Turn anticlockwise
Adjustment stroke volumeFig. 5:
english
