Manual
14
Dosingsystem(Optional)
Optional with 1 or 2 dosing unit(s) (24 V) in an aluminium housing•
24 V power supply unit for the electrical power supply•
Null modem cable for the connection to PC (COM Port / RS 232)•
Control software•
Control electronics•
Medium connections
RS 232
Power supply
Power switch
Dosing system, dimensions in mmFig. 7:
Use the null modem cable to connect the dosing system (RS 232) →
to the PC.
Connect the power plug to the mains power supply.
→
Switch on the dosing system. →
Start software ("pumpcontrol.exe"). →
Select COM Port (COM setup: Standard COM 1). →
Begin the delivery process with "Start" of the respective dosing →
unit (Pump 1 / Pump 2).
Check COM setup or select a different port. →
Check the polarity of the power supply adaptor. →
Connect the mains power cable to the dosing unit. →
Switch on the dosing system. →
Only start the software after the dosing system is connected →
properly and turned ON.
Check the flow direction.
→
Check whether a null modem cable is being used. →
english