User Manual

ENGLISH



 

Keep in mind that the process may be influenced by all the parameter

settings you make

� Fill-in the table on page 28 with your settings of the

controller�

 

The device has three operating modes :



Display of the measured flow rate and the switching thresholds pro-

grammed� From the Normal mode, you can access the Calibration and

Simulation modes�



Access to the programming of all the parameters (unit, K-factor, calibra-

tion through the „Teach-in“ feature, output, filter, bargraph)� From the

Calibration Mode, you can go back to the Normal Mode�



Entering a theoretical flow rate value to test the configuration program-

med in the Calibration Mode� From the Simulation Mode, you can go

back to the Normal Mode�

 