User Manual

ENGLISH ENGLISH

 
 
The controller 8032 can be cleaned with water or any solution compatible
with the materials the device is made of
�
For more information, please contact your Bürkert sales office�
 
  
ERR 0 Calibration
data is lost�
Reading error: the process is
stopped�
Press the ENTER key to go back to the Normal mode�
The device has returned to its default configuration: the device
must be calibrated again�
If the message appears frequently, send the device back to your
Bürkert sales office�
ERR 1 Calibration data cannot be
saved�
Write error: the process is
stopped�
Press the ENTER key to go back to the Normal mode�
The device displays the configured data; BUT this data has not
been saved: the device must be calibrated again�
If the message appears frequently, send the device back to your
Bürkert sales office�
ERR 2 The calibration parameters
cannot be accessed�
Menu reading error: the pro-
cess goes on operating�
Press the UP and DOWN keys under the display to scroll through
the menus�
If the message appears frequently, send the device back to your
Bürkert sales office�