User Manual
10.2. 8025 flowmeter-totalizer
Spare part Order code
Cover in PC, with lid, incl. window, screws,
sticked foil and electronic board
425433
Set with 8 FLOW foils 553191
Set including:
• 2 M20x1.5 screw plugs
• 2 flat seals
444705
Set including:
• 1 green FKM seal
• 1 black EPDM seal
552111
Housing incl. snap ring and nut 552398
Snap ring 619205
Nut 619204
Flow sensor with coil (short sensor) for
DN ≤100 + replacement instructions
633366
Flow sensor with coil (long sensor) for
DN ≥100 + replacement instructions
634757
11. PACKAGING, TRANSPORT
note
Damage due to transport
Transport may damage an insufficiently protected device.
• Transport the device in shock-resistant packaging and away
from humidity and dirt.
• Do not expose the device to temperatures that may exceed the
admissible storage temperature range.
12. STORAGE
note
Poor storage can damage the device.
• Store the device in a dry place away from dust.
• Storage temperature of the device: 0 to +60 °C.
26
Packaging, Transport
Type 8025/8035 battery powered
English