Owner's manual

SE 56
19
210_EN_BU_4_3_5X.d
oc
SHORT PRESSING (< 1 SECOND):
It increases the numeric figure or the parameter selected by the cursor
It goes to the previous subject on the menu
batch start/stop (when enabled)
LONG PRESSING (> 1 SECOND):
It decreases the numeric figure or the parameter selected by the cursor
It goes to the next subject on the menu
SHORT PRESSING (< 1 SECOND):
It moves the cursor rightward on the input field
It goes to the following subject of the menu
It changes the display of the process data
LONG PRESSING (> 1 SECOND):
It moves the cursor leftward on the input field
It goes to the previous subject on the menu
SHORT PRESSING (< 1 SECOND):
It enters /leaves the selected function
It enables the main menu for the instrument configuration
It cancels the selected function under progress
LONG PRESSING (> 1 SECOND):
It leaves the current menu
It enables the totalise reset request (when enabled)
It confirms the selected function
KEYBOARD
For converter without keyboard (
blind version), the
programming of functions is made up by the IF2
serial device:
BLIND VERSION