Manual
SE56
33
BATCH FUNCTION
For each formula you can
associate:
Product quantity
Product name
Maximum time for
batch (safety time for
each formula)
After activating the batch
function from visualization
page, proceed as in the
aside example.
VISUALIZATION PAGE WITH BATCH FUNCTION ENABLE
Configuring formula n°
Product Name
Batch in progress
V
isualizations:
1) batch off: n° batch effected
2) batch on: decrease safety timer
3) configuration: safety timer indefinite if
timer=0 timer disabled
Configuration of batch quantity
Visualization batched product
Input key code
Choose the formula number for associate
quantity batch (between 00 and 15)
Input quantity product for each batch
Enter product name for batch (max 8 characters.)
Enter maximum time for batch
If timer = 0, safety timer disabled max time set
= 6000 sec.
Note: if to one output is assigned the function of
batch alarm, to the attainment of the maximum
time, beyond to the interruption of the batch,
will have activated also the alarm out
p
ut
From the visualization pages
ENABLE BATCH
Enable one of the following functions to enable and configure the batch on the transmitter:
POS. 5.8-9-10: START/STOP batch from input
POS. 6.1-2-3-4: assign one of the functions to one of two output
Some examples of operation of such functions are visualized from page 14
Vertical bars behavio
r
x First bar: volume that is distributing, 100% represents the volume to be delivered, identified by the “drop” symbol
x Second bar: dosing timer, 100% represents the security maximum time set for the batch, “T” symbol
x Third bar: remains deviation measure, as a normal flow measure
CONFIGURATION OF A
BATCH