User Manual

Installation and Wiring

Type 8071

Warning

Risk of injury due to non-conforming installation.

• The electrical and fluid installation can only be carried out by

qualified and skilled staff with the appropriate tools.

• Install the appropriate security devices (correctly dimensioned

fuse and/or circuit breaker).

Risk of injury due to unintentional switch on of power supply

or uncontrolled restarting of the installation.

• Take appropriate measures to avoid unintentional activation of

the installation.

• Guarantee a set or controlled restarting of the process sub-

sequent to the installation of the device.

7.2. Installation instructions

note

Risk of damaging the device if it is subjected to mechanical

stress.

• Use flexible hoses.

note

The oval rotors may be damaged if particles with dia-

meter > 75 µm go into the fitting.

• Install a strainer of 75 µm upstream and as close as possible to

the device.

→ Install a by-pass line on your installation to service the device

and the strainer without stopping the process (see Fig. 4).

valve

direction of flow

filter

8071

Fig. 4: Installation of a by-pass line

→ Install the device onto the pipe so that the shafts of the rotors

are in a horizontal plane.

Seal the external threads of the fitting with a product com-

patible with the materials from which the device housing

and the pipe are made.

→ Screw the device onto the pipe.

English