Owner's manual

14
Installation and wiring
Version Type of connector
Detector with
NPN/PNP tran-
sistor output
Female 5-pin M12 connector (not supplied)
Detector with
relay output
EN175301-803 (type 2508 supplied) and 5-pin
M12 (not supplied) female connectors
Flowmeter with
relay output
EN 175301-803 (type 2508 supplied) and 8-pin
M12 (not supplied) or 5-pin M12 (not supplied)
female connectors
Flowmeter
without relay
output
Female 5-pin M12 connector (not supplied)
Type of connector Cable type
M12 with order code
917116
• shielded
• 3 to 6.5 mm in diameter
• with wires with a max. cross section
of 0,75 mm
2
2508 with order code
438811
• shielded
• 6 to 7 mm in diameter
• with wires with a cross section of
between 0.14 and 0.5 mm
2
7. INSTALLATION AND WIRING
7.1. Safety information
DANGER
Risk of injury due to high pressure in the installation
• Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
Risk of injury due to high fluid temperatures.
• Use safety gloves to handle the device.
• Stop the circulation of fluid and drain the pipe before loosening
the process connections.
Risk of injury due to the nature of the fluid.
• Respect the regulations on accident prevention and safety relat-
ing to the use of aggressive fluids.
Risk of injury due to electrical voltage.
• Shut down the electrical power source of all the conductors and
isolate it before carrying out work on the system.
• Do not unscrew the cover of a powered device.
• Observe all applicable accident protection and safety guidelines
for electrical equipment.
English
Installation and wiring