Instruction Manual

18
Technical data
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-10 +10 +30 +50 +70 +90 +110
A
PVDF (PN10)
PVC (PN10)
PP (PN10)
T (°C)
P (bar)
PVDF
(PN16)
PVC + PP
Metal
A: Operating range
Figure 6 : Fluid temperature-pressure dependency for the flowmeter 8036 (SE36 associated to a fitting S030 with PVDF
paddle wheel)
6.3.2. General data
Pipe diameter DN06 to DN400;
For a fitting S020 or S030 the appropriate diameter is
determined using the flow rate / DN / fluid velocity graphs: refer
to the operating manuals of the fittings
Type of fitting • S020 for flowmeter 8026: see corresponding operating
manual
• S030 for flowmeter 8036: see corresponding operating
manual
• S070 for flowmeter 8076: see corresponding operating
manual
Fluid temperature
• 8026
• 8036 with fitting S030 in PVC
1)
• 8036 with fitting S030 in PP
1)
• 8036 with fitting S030 in PVDF
1)
, brass
1)
or
stainless steel
1)
• 8076 with fitting S070 in aluminium
• 8076 with fitting S070 in stainless steel
• -15 to +100 °C; Also factor in the fluid temperature/pressure
dependency for the 8026 inserted into an S020 fitting: see
Figure 5
• 0 to +50 °C; Also factor in the fluid temperature/pressure
dependency for the 8036: see Figure 6
• 0 to +80 °C; Also factor in the fluid temperature/pressure
dependency for the 8036: see Figure 6
• -15 to +80 °C; Also factor in the fluid temperature/pressure
dependency for the 8036: see Figure 6
• max. +80 °C
• max. +100 °C
English
Type 8026- 8036- 8076