Instruction Manual

65
Maintenance and troubleshooting
Red
LED
Current
output
Transistor
output
Icon Message dis-
played in the
Info menu
Possible cause Recommended action
OFF 4-20
mA
Switched
2)
"W:TRnPu 1:1
set"
In “Pulse” mode, the
volume entered for
a pulse is incorrect
(see chap. 9.12.10).
→ Enter an appropriate
volume.
→ check the K factor.
1)
if the DIAG MODE function of the "Output.AC1" or "Output.AC2" menu is set to "22 mA" (see chap. 9.12.9); else, the
current output delivers a standard current between 4 and 20 mA
2)
If the "PVAR" function of the "Output.TR1" and/or "Output.TR2" menus is set to "warning" (see chap. 9.12.10); else, the
transistor outputs are operating depending on the set thresholds.
English
Type 8026- 8036- 8076