User Manual

13
Technical data
Type 8026- 8036- 8076
6.3.2. General data
Pipe diameter DN06 to DN400;
For a fitting S020 or S030 the appropriate diameter is determined using the flow rate / DN /
fluid velocity graphs: refer to the operating manuals of the fittings
Type of fitting • S020 for flowmeter 8026: see related operating manual
• S030 for flowmeter 8036: see related operating manual
• S070 for flowmeter 8076: see related operating manual
Fluid temperature
• 8026
• 8036 with fitting S030 in PVC
1)
• 8036 with fitting S030 in PP
1)
• 8036 with fitting S030 in PVDF
1)
, brass
1)
or
stainless steel
1)
• 8076 with fitting S070 in aluminium
• 8076 with fitting S070 in stainless steel
• -15 to +100 °C; Also factor in the fluid temperature/pressure dependency for the 8026
inserted into an S020 fitting: see „Fig. 9“
• 0 to +50 °C; Also factor in the fluid temperature/pressure dependency for the 8036: see
„Fig. 10“
• 0 to +80 °C; Also factor in the fluid temperature/pressure dependency for the 8036: see
„Fig. 10“
• -15 to +80 °C; Also factor in the fluid temperature/pressure dependency for the 8036:
see „Fig. 10“
• max. +80 °C
• max. +100 °C
English