User Manual

Installation and wiring

Type 8026- 8036- 8076

7. INSTALLATION AND WIRING

7.1. Safety instructions

danger

Risk of injury due to high pressure in the installation.

• Stop the circulation of fluid, cut off the pressure and drain the

pipe before loosening the process connections.

Risk of injury due to electrical voltage.

• Shut down and isolate the electrical power source before

carrying out work on the system.

• Observe all applicable accident protection and safety regula-

tions for electrical equipment.

Risk of injury due to the nature of the fluid.

• Respect the prevailing regulations on accident prevention and

safety relating to the use of aggressive fluids.

Warning

Risk of injury due to non-conforming installation.

• The electrical and fluid installation can only be carried out by

qualified and skilled staff with the appropriate tools.

• Install appropriate safety devices (correctly rated fuse and/or

circuit-breaker).

• Respect the assembly instructions for the fitting used.

Risk of injury due to unintentional switch on of power supply

or uncontrolled restarting of the installation.

• Take appropriate measures to avoid unintentional activation of

the installation.

• Guarantee a set or controlled restarting of the process sub-

sequent to any intervention on the device.

note

The tightness of the device is not guaranteed when the cover

is removed.

• Once the cover is removed, prevent the projection of liquid

inside the housing.

The device may be damaged if a metal component comes

into contact with the electronics.

• Prevent contact of the electronics with a metal component

(screwdriver, for example).

English