Manual

7 Setup

with PACTware

7.1 Connect the PC

Fig. 26: Connecting the PC via HART to the signal cable

1 Sensor

2 HART resistance 250 Ω (optional depending on processing)

3 Connection cable with 2 mm pins and terminals

4 Processing system/PLC/Voltage supply

7.2 Parameter adjustment with PACTware

For parameter adjustment of the sensor via a Windows PC, the

conﬁguration software PACTware and a suitable instrument driver

(DTM) according to FDT standard are required. The up-to-date

PACTware version as well as all available DTMs are compiled in a

DTM Collection. The DTMs can also be integrated into other frame

applications according to FDT standard.

Note:

To ensure that all instrument functions are supported, you should

always use the latest DTM Collection. Furthermore, not all described

functions are included in older ﬁrmware versions. You can download

the latest instrument software from our homepage. A description of the

update procedure is also available in the Internet.

7.3 Saving the parameter adjustment data

We recommend documenting or saving the parameter adjustment data

via PACTware. That way the data are available for multiple use or

service purposes.

Via

the interface adapter

and HART

Prereq

uisites

46 LEVEL TRANSMITTER 8136 • 4 … 20 mA/HART - two-wire

7 Setup with PACTware

41783-EN-120316