Manual

11 Supplem ent
11.1 Technical data
General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts with encapsulated antenna system
- Process fitting PVDF, 316L
- Process seal FKM (IDG FKM 13-75)
- Antenna PVDF
Materials, wetted parts with plastic horn antenna
- Adapter flange PP
- Seal, adapter flange FKM (COG VI500), EPDM (COG AP310)
- Antenna PBT-GF 30
- Focussing le nse PP
Materials, non-wetted parts
- Compression flange PP
- Mounting strap 316L
- Fixing screws, mounting strap 316L
- Fixing screws, adapter flange 304
- Housing plastic PBT (Polyester), 316L
- Seal between housing and housing
cover
Silicone
- Inspection window in housing cover
(optional)
Polycarbonate
- Ground terminal 316L
Process fittings
- Pipe thread, cylindrical (ISO 228 T1) G1½ A
- American pipe thread, tapered 1½ NPT
- Flanges DIN from DN 80, ANSI from 3", JIS from DN 100
10K
- Hygienic fittings Clamp, bolting according to DIN 11851, Tuchen-
hagen Varivent
Weight depending on process fitting and
housing material
0.7 … 3.4 kg (1.543 … 7.496 lbs)
Max. torque, mounting screws - strap on the
sensor housing
4 Nm
Max. torque flange sc rews
- Compression flange DN 80 5 Nm (3.689 lbf ft)
- Adapter flange DN 100 7 Nm (5.163 lbf ft)
Max. torque for NPT cable glands and Conduit tubes
- Plastic housing 10 Nm (7.376 lbf ft)
LEVEL TRANSMITTER 8136 • 4 … 20 mA/HART - two-wire 59
11 Supplement
41783-EN-120316