User guide

55
Adjustment and commissioning
I. CONFIGURING THE PID FUNCTION
Refer to chap. 8.9 to access Parameters menu.
Parameters Functions F1...F6:
PID
Setup
PV:
SP Type:
M0:MAIN
internal
external
Mx:
...
1)
PV range PVRange-:
PVRange+:
ENTERING
ENTERING
Reg type: Mode:
Low:
High:
linear
non-linear
ENTERING
ENTERING
3)
This is
when the
device is be-
ing parame-
tered............
....................
This is
when the
device is be-
ing parame-
tered............
....................
CMD Direction Channel 1/2
Rise
Fall
Channel: Single
Dual
Advanced
SP-PV: M0:MAIN
Mx:
...
1)
2)
see page 58
.
.
.
1)
The choices offered depend on the modules fitted and/or the options activated. See chap. 8.10.4 and chap. 8.16.
2)
This function is present if "SP Type" = "external"
3)
These functions are present if "Reg. Type Mode" = "non-linear"
Type 8619
english