User Manual

26
Adjustment and commissioning
8.4. Using the navigation button and the dynamic keys
MENU ABORT SAVE OK
The navigation button is used to move in 4 directions, symbolised throughout the
manual by
and .
F1
F2
F3
F4
To activate the dynamic
function to the far right, press
F4
To activate the dynamic
function to the far left,
press F1
To activate the second
dynamic function, press F2
To activate the third
dynamic function, press F3
The arrows displayed show
the directions in which you
can browse in this view.
LED A: shows the system
status. See chap. 9.
LED B: shows the sensor
status. See chap. 9.
Figure 20 : Using the navigation button and the dynamic keys
You want to... Press...
....access the Configuration level Dynamic function, "MENU", from any view in Process
level
...go back to Process level Dynamic function, "MEAS"
...access the menu displayed Dynamic function, "OK"
...access the highlighted function Dynamic function, "OK"
...confirm the enter Dynamic function, "OK"
...save modifications Dynamic function "SAVE"
...go back to the parent menu Dynamic function "BACK"
...cancel the current operation Dynamic function "ABORT"
...set a setpoint value Dynamic function "SETP"
...activate manual mode in a configured and activated
function
Dynamic function "MANU"
...manually set the percentage of the function Dynamic function "CMD"
...force the result of a function to 0% Dynamic function "0%"
...force the result of a function to 100% Dynamic function "100%"
...activate automatic mode in a configured and acti-
vated function
Dynamic function "AUTO"
...start teach-in Dynamic function "START"
...end teach-in Dynamic function "END"
...answer the question asked in the affirmative Dynamic function "YES"
...answer the question asked in the negative Dynamic function "NO"
...select the highlighted character or mode Dynamic function "SEL"
Type 8619
english