User guide

Installation and commissioning

Type S020

Flow direction

Marking of the flow

direction

Polarizing pin

→ Position the pola-

rizing pin opposite

the flow direction.

Polarising pin

→ Align the polarizing

pin (a < 3°) in the

axis of the pipe.

→ Tip 4 points at 90°

from each other.

→ Weld around the

entire circumfe-

rence of the fusion

spigot.

Fig. 13: Installing a welding socket, for measuring devices with a

clamp connection

7.2.6. Installing a fusion spigot (PE, PP or

PVDF)

ø 40 mm

→ Drill a hole 40 mm in dia-

meter in the pipe.

Internal pola-

rising slot

External pola-

rising slots

→ Position the oblong

internal polarising slot

opposite the flow direction.

→ Align 2 of the 4 external

polarizing slots (a < 3°) in

the axis of the pipe.

Weld

→ Weld around the entire cir-

cumference of the fusion

spigot.

Fig. 14: Installing a fusion spigot (PE, PP or PVDF)

English