Instruction Manual

 
ENGLISH ENGLISH
NPN
0 V
V+
V+
IN
0 V
(*)
Sensor Receiver
Load
The controller is fitted with a steerable M12 fixed connector:
Unfasten counternut. Turn the fixed connector to the right position, but by max. 360° to avoid
twisting of the cables inside the housing. Fasten counternut using the appropriate tool while
maintening the fixed connector in the right position.

When the voltage at the relay terminals is higher than 24 V and the cable
plugs are not correctly plugged-in and tightened, there is a risk to elec-
trocute yourself.
Always check all the cable plugs before powering the device to ensure
the good operating of the device.



Common
Not connected
Normally Closed
Normally Open
Frequency
Not connected
(*)
(*) Functional earth


Freq.
1
3
2
4
5
3
1
2
0 VDC
V+
(12-30 VDC)

