stroller kit Burley Stroller Kit Owner’s Instruction and Safety Manual For D’Lite,™ Solo,™ Encore,™ Cub,™ Honeybee,™ and Tailwagon
Congratulations! Safety Guidelines By purchasing the Burley Stroller Kit, you’ve increased the fun and excitement that you and your family can have with your Burley trailer. 1. Consult your child trailer manual for trailer safety guidelines. Please go to www.burley.com or contact us at (541) 687-1644 or burley@burley.com to register your warranty information. IMPORTANT: It is very important for you to familiarize yourself with your STROLLER ATTACHMENT by reading this manual before use.
Tools Required: (2) 10mm open end wrenches (1) 25mm (or 1”) wrench (1) 5mm hex wrench 3. Slide stroller kit onto tow bar. Figure 3 Installation 1. Remove tow bar from trailer. 2. Remove nut and bolt from tow bar end. Discard bolt and lock nut. Safety strap and D-ring will be re-installed. Figure 2 4. Place D-ring and safety strap on supplied 6mm x 50mm bolt. Line up holes in stroller kit, tow bar and flex connector and install bolt. Secure with nut.
5. Around handlebar center, slide tether strap end through small loop on other end of strap and tighten securely. Photo 1 Photo 1 6. Slide tow bar into trailer receptacles and line up front tow bar hole with rear receptacle hole. Insert retaining pin through both holes and lock retaining hoop securely. Figure 5 7. Test tracking adjustment by pushing trailer. Trailer should roll straight. 4 | BURLEY STROLLER KIT OWNER’S INSTRUCTION AND SAFETY MANUAL To Adjust Tracking 1.
To Convert from Strolling to Trailering WARNING! When converting this attachment for trailering, make sure that stroller wheel is in proper position before attaching trailer to your bicycle. do not use this product without retaining pin and safety strap properly installed. Failure to follow the instructions in this manual and your trailer manual can cause an accident resulting in serious injury. 1. Engage parking brake and tighten knob to secure stroller wheel in “Bike” position.
Burley Accessory Limited Warranty Burley accessories are warranted from date of purchase against defects in materials and workmanship under normal use and service. Burley will repair or replace parts it determines to be defective for a period of five years. The Burley accessory owner must present the accessory for repair at place of purchase, with an original sales receipt or similar proof of purchase. This warranty applies only to the original owner and is nontransferable.
