Owner’s Instructions and Safety Manual Burley Travoy
Table of Contents 1. Box Contents / Required Tools 2. Burley Travoy Guide 3. Unfolding Your Trailer Steps 1-6 U. Unfolding Your Trailer Steps 5 & 6 5. Folding Your Trailer 6.-7. Connecting Your Trailer to Your Bike 8. Loading Your Trailer 9. Rules / Before You Ride 10. Safety Guidelines 11. Warranty 12. Replacement Parts Important Before using your trailer please review this manual. For questions and additional information, contact your authorized Burley dealer or visit burley.com.
Box Contents: 1 tote bag, 1 manual, 1 warranty card, 1 hex key ( 4mm 2 tie-down straps, 1 hitch, 2 wheels, 1 trailer Required Tools: 4mm Hex key (included)
Burley Travoy Guide 1. Flex Connector 7. Tow Bar 2. Upper Frame Flinge 8. Light Mount 3. Twist Grips 9. Upper Frame k. Middle Frame Flinge 10. Lower Frame 5. Tie-Down Buttons 11. Shelf 6. Push-Button Wheel 12.
Unfolding Your Trailer Steps 1 -4 1. Remove wheels from folded trailer. 2. Press the rubber cap in the center of the wheel and insert axle into axle tube. Pull firmly to ensure axle is engaged. 3. Pull out the kickstand. 4. Unfold the shelf.
Unfolding Your Trailer Steps 5 & 6 5. Release the middle frame hinge by rotating the twist grip in the direction of the arrow. Then unfold the upper frame. 6. Release the upper frame hinge by rotating the twist grip in the direction of the arrow. Then unfold the tow bar.
Folding Your Trailer Follow the steps on pages 3 and 4 in reverse order to fold the trailer. 1. To fold the shelf, first pull the release cable on the bottom and then pull the shelf toward the frame. 2. Store the wheels inside the folded shelf with the axle side of the wheels facing each other.
Connecting Your Trailer to Your Bike 1. Attach the hitch to your seat post using the two M6 bolts provided. Adjust the height to ensure trailer does not contact bike wheel or accessories. 2. Attach the trailer to the hitch by rotating the latch to the right and dropping the flex connector onto the hitch pin.
automatically when the flex connector is fully seated. To disconnect the trailer, rotate the latch then lift the flex connector off the hitch pin. Hold your bike upright to make it easier for the coupling to slide on and off the pin. Notes: 1. Hitch is compatible with 25mm to 32mm seat posts. 2. Use of this hitch with carbon fiber seat posts is not recommended. 3. if your legs rub on the sides of the hitch, lowering it can help.
Fipire 1 Loading Your Trailer There are many different ways to load your Travoy. Tie-down buttons are provided in eight places on the outside of the frame. These are intended to be used with swivel-lock buckles included on Travoy bags and accessories. Cargo straps and a basic tote bag are included with your trailer. Various additional bags and accessories are available for different styles and functions. However you load your trailer, it’s important to follow these guidelines: 1.
Rules 1. 2. 3. DO NOT carry passengers. DO NOT stand or sit on trailer. Always comply with local vehicle traffic and lighting laws. It is the user's responsibility to ensure that the load is adequately secured for safe operation. A safe maximum speed is dependent on the trailer load, road conditions, traffic, condition of the towing bicycle, and the experience of the rider. It is the rider's responsibility to ensure that they maintain a safe speed for the trailer load, road conditions and traffic.
Safety Guidelines Refer to the bicycle manufacturer's instructions to determine if the bicycle is suitable for towing a trailer. It is recommended that a qualified bicycle mechanic does a safety check of the towing bicycle before attaching the trailer. Prior to each ride, be sure the trailer does not interfere with braking, pedaling or steering of the bicycle. It is recommended that a rearview mirror be used on the bike. Always comply with local regulations when using the trailer on public roadways.
Warranty Burley trailers are warranted from date of purchase against defects in materials and workmanship under normal use and service. Burley will repair or replace parts it determines to be defective as follows: 3 years for trailer and skin, 5 years for bags and straps. The Burley trailer owner must present the trailer for repair at place of purchase, with an original sales receipt or similar proof of purchase. This warranty applies only to the original owner and is non-transferable.
Replacement Parts Description Warranty Part Number Hitch 3 years 960088 Tie-down straps (set of 21 5 years 950167 Tote bag 5 years 960086 Wheel with push-button axle, tire and tube 3 years 950171 Tire (12.5" X 21 - 950172 Tube (12.5" X 2") with angled valve - 950173 Flex Connector Kit 3 years 950176 Tie-down buttons [ i .
Notes:
m P.541 .687.1 644 800.423.8445 F.541 .687.0436 BURLEY DESIGN Eugene Oregon burley0burLey.com burley.
